Barrow Dabel-a Series Radiator, 120x2, 34mm

Product feels to be a good quality, only problem was that he some of the fins where somewhat bent

Based upon the description i thought I was buying a 34mm thick radiator. These are not 34mm. I bought 2 and measured them at 30mm thick. The other issue I had is they were not that clean inside. Make sure you flush them very well with hot water and shake to remove any scale and contaminants inside the radiator. That being said, they are ok for the money. I needed them for a specific barrow Rhopilema case I was building and they needed to line up with the ports perfectly so i was not going to take a chance on another brand. They cool my i9 9900K ok but I run all cores at 5Ghz plus and need better cooling. I think i am going to step up to the barrow 40mm thick radiators and re-purpose these for another inexpensive watercooled build.

Radiator look pretty good quality . I was looking for some affordable components for my loop. One thing to note here is make sure you rinse with vinegar or some other stuff made for radiator pc cleaner. I rinse mine with vinegar and the first 4 time water coming out was pure blue and lots of metal shavings. Keep that in mine.bi did it for a total of 10 times then let it ran with tap water for a few minutes , after that I rinse 3 more times with distilled water.

I used this in a recent build since it said copper, even in searches off sites other than amazon. Everything seemed like it was a good copper rad. 2 weeks after putting the build together I started noticing white buildup on different components in the loop. I took the pc apart and while cleaning the rad, I opened the bottom port and I see the cause of the issue. There is aluminum inside the radiator, causing a reaction in the loop. Luckily I caught it before it did any major damage to other components, but this is extremely disappointing.