All Metal Replacement Sprayer Wand, 1/4" & 3/8" Brass Barb Sprayer Wand with Stainless Steel Shut off Valve & 2 Hose Clamps (29 Inches)

I have a decent tank sprayer but the wand was failing and the hose had a kink right where it attaches to the wand. This was the perfect solution. Cut the old hose off right at the old wand (removing the section with the kink). attached the new sprayer with the included hose barb and double hose clamps. Took all of 2 minutes and it works like a champ. Sprayer seems reasonably well made, includes several fittings appropriate for various hose sizes and applications. I did remove the sprayer lock (it's just a little metal ring - 10 seconds to pull off with a pair of pliers) it tends to lock the sprayer on and is pretty much a useless annoyance. So yea, my sprayer is now good as new and this was the solution. Yay me.

Infinitely superior to the OEM wand that came with my tow-behind Brinley sprayer, the handle of which cracked after first use, and leaked like a sieve at the joints. Also infinitely superior to any after-market spray wands I've inspected. I got the 36" version, the business end of which came in two parts, one of typical pump sprayer length, and a shorter one to add to the end of the longer one. Skeptical at first because of increased opportunity for leaks, I realized the two-piece approach essentially gave me three wands of differing lengths for different purposes - and no leaks, even at high pressure.

Badazz long, fairly priced, all metal Sprayer Handle and adjustable length sprayer extention sections. Easily add or subtract several tube sections to adjust the length of the sprayer rod.Super fine mist - to heavy spray with a few turns of this fantastic spray tip!This sprayer is NOT a plastic POS which you would have to replace EVERY few years and cannot even make it through two Arizona summers lol. Love the length - No more aching low back from stooping for an hour or more, spraying weeds in the gravel front and back yards! I have a severe low back problem and I love this sprayer as its long enough for me to use for hours without stooping or bending down for ANYTHING EXCEPT TO pump the handle to add more pressure to the chemical tank. Just remeber... NEVER LIFT OR CARRY THE TANK AROUND BY THE TOP PUMP HANDLE! IT BREAKS OFF FROM THE TOTALLY INADEQUATE ATTACHMENT POINTS AT THE BOTTOM CENTER OF THE TANK. ITS ONLY REAL FLAW. OTHERWISE ITS A GREAT TANK! WITH A NEARLY USELESS VERY SHORT SPRAY WAND. SO, IF YOU'RE TALL. Like 6 feet 2 inches tall as I am. The included plastic wand is a BACK BREAKER. LOL. 4 OUT OF 5 AS THE FLAW WITH CARRYING THE TANK BY THE PUMP HANDLE IS NOT A GOOD IDEA... IT SHOULD BE WELL ANCHORED TO THE CENTER BOTTOM OF THE PRESSURE VESSEL. ITS NOT.LOVE THIS THING OTHERWISE

Purchased a two pack set of this wand March 20, 2024. I used it until April 26, 2025 with no problem. Then the wand just fell out of the handle while I was spraying Ground Clear around a fence line. Luckily I had good rubber gloves on at the time. The stainless extension tube is only pressed in to the connection at the handle. There are no flanges or threads holding these tubes into the handle. After the first one fell out I was glad I had bought a 2 pack. But not for long. The second one fell out of the handle the same day. This is absolutely NOT well made. It could be dangerous depending on what like of product you might be spraying and what kind of gloves you are waring. I consider this purchase to be a complete waste of money. I do not recommend that anyone purchase this product.

I bought this to replace the cheap plastic wand that came with my backpack sprayer. This is extremely durable and easy to adjust the spray pattern on the tip. I have been extremely happy with this wand.

Warning, Sharp edge in handle. The inside of the handle has a very sharp edge, because of the stamping process. I used a metal file to take the edge off. I am not a big fan of the rivet that holds the handle. I hope it lasts.

Real great to get something that works as advertised

This product appears to be manufactured with quality materials. It took about 2 minutes to replace the old handle with the new. It takes a lot of very fine tuning to get a functional spray pattern. I found there are two patterns, jet and fine mist, nothing in between. The plastic sprayer I replaced was easier adjusting the spray pattern. I do think this product is a little over priced for what I went through to get a fine mist spray. The other fault I have found is the flow does not completely stop when you release the handle. It continues to spray for about 5 to 10 seconds so you have to be careful where you point the nozzle when done spraying. It fit the 1/4 inch hose on my spray bottle just fine. They did include a 3/8 in. fitting. For the reasons listed above I would not recommend this product to others.